Mechanic 857DW+heat gun hot air gun rework station Technical parameters Power Consumption:580W Air pump:DC motor,double turbine rotate out of the wind Temperature control:100 to 450 degrees Gas flow rate:50 litres/minute Component length:110cm Size:17 x 10.5 x 24 cm Noise:less than 78db Product features: 1, linear air volume adjustment, mains have change the air volume can be stable, double vortex spinning wind, the wind is soft, no impact. 2, express of temperature, 3 seconds to reach the set temperature, temperature of liquid crystal display (LCD), intelligent sensor, automatic cooling, delay shutdown. 3, welding with plastic components, ringer, such as the tail inserted inline deformation, welding circuit board no bubbles. Shield does not change color 4, BGA chip is not easy to break. Product use: 1, suitable for a variety of components desoldering. Such as: SOIC, CHIP, QFP, PLCC, BGA, etc. 2, used in thermal shrinkage, drying, in addition to the paint, in addition to stick, thawing, preheating, disinfection, plastic welding, etc.